jackyma0126
🏅🏅🏅
有誰使用過BWA有機吸附劑
如何還原?
還原後的顏色?
如何還原?
還原後的顏色?
有誰使用過BWA有機吸附劑
- 主題發起人 jackyma0126
- 開始日期
- 關注者 1
進口水產餌料批發零售、海水觀賞魚批發零售、海水種苗繁殖
各種海水飼養器材零售、水產餌料、魚隻進出口
各種海水飼養器材零售、水產餌料、魚隻進出口
To regenerate: Dissolve 4 cups table salt in 1 US-gallon of room-temperature water per 250-ml of resin to be regenerated in a clean pail; place resin into pail and stir; allow beads to soak overnight; strain and rinse beads thoroughly in fresh water before re-using. Do not regenerate with bleach, which will damage resin and could kill aquarium inhabitants.
簡單說就是要攪拌,然後置放過夜,再換新水沖洗!
簡單說就是要攪拌,然後置放過夜,再換新水沖洗!
OP
jackyma0126
🏅🏅🏅
yuee0015
🔰🔰
說明上有寫：regenerate once the resin becomes medium-brown in appearance. The original brightness of the resin may not be re-attained, however the resin will perform as well as before.
就是說還原後的顏色也許變不回新的雪白，但效能不減。
OP
