• 本版主要以供給各地魚友作為交流認識使用
    任何站上舉辦的活動或是魚友彼此的聯絡交誼活動都可以在此討論
    非各地活動或是認識交流的文章,如個人問題或其他討論,請發表至各分類版或閒聊版區。
    交流區亦為討論版,禁止任何交易資訊,有任何交易需求請洽交易版。

Foreign friends club - MD tank case study

十幾年的專業水族魚缸設計、訂製
0939-092862 Line ID: chusin86
What does the Fiji or red seas sand different from Philippines sand ? Is it more on the less possible phosphate or heavy metal content ?

Can anybody share your experience and connects here ?

More over I been thinking adding sand to increase the surface for bacteria to colonize , but I wonder the condition of the sand should be able to have more pores for bacteria to stay? (In layman term) but some one say better if it is aragonite base and limestone is the best ?


Sent from my iPhone using Tapatalk
 
You are way too much concerning about contamination. I wouldn't fixate on this,or can't go on.
The companies want to hold and establish their reputation.I would trust their product not harmful.
I think they are all good. It is kind of " feel" thing.
 
Yeah reputation , this is Also why I sometimes buy a buy expensive one may be just to have safe feeling.

Today check my water parameter :
Kh - 7 dkh
Calcium - 490
Mg - 1395
No3- 10 ppm
Po4 - 0.12 ppm

I think my no3 and Po4 is again fooling me around ?


Sent from my iPhone using Tapatalk
 
Since you are going to restart the tank. The parameters now seem not much of importance.
The ca and mg ,I roughly target on a ratio of 1:3. Say suppose ca is 400 then mg should be at about 1200.
It is my way on this. I keep kh at about 7~8dkh.
Don't ask me why. I was tought this way.
Just my own way of reefkeeping. No one has to pursue any specific method or parameters that you don't agree.
For your reference
 
最後編輯:
Thanks David ,

Got the corals sand today , tomorrow will be busy working on my tank.

Buy also a TDS meter and check my RODI and its zero TDS , counter check those water only running RO it's 0.08 and try the one direct from faucet it goes as high as 80TDS


Sent from my iPhone using Tapatalk
 
I checked my rodi water with tds,it is 1.0!maybe it is about time.
 
How long since you last change your cartridge? Mine still zero after certain period of time .


Sent from my iPhone using Tapatalk
 
since you are going to redo your tank, if you can make journal style project with photos to share with us. you will probably receive some comment and advises.
 
最後編輯:
Actually this is like a partial redo , just adding more sands and I rule out copper as the poly filter Tony gave me the other day looks fine with no discoloration after one day of Running water in it.


Sent from my iPhone using Tapatalk
 
I want to use my tank for a case study for all , I will documented it and hopefully we succeed.

The poly filter looks fine as of now as there is no coloration whatsoever so far ; compliment from Psidriven , thanks tony for the poly filter ;

7b1333975941faea36f6f0a2db193ce5.jpg


af2aa18fdb5ab72a12a2239bedcacb79.jpg


124553c99e3b13df5701260438695bd8.jpg


Bought 2 bags of corals sand and starting washing it :

8cb99952d7c47848d853aad9fa6bcd4d.jpg


e86d9de1a85ab2fea2cc489c477843c1.jpg


6760e8ccfa70eed3ff5c310131806a7f.jpg


6420becc31c951e6276746750b2cb100.jpg


Calcium carbonate content , white clean fizzes after adding vinegar ;

5e3718a81664e2aa598fe705fa7fc532.jpg


93cfc196e05509ec98704d02573ce5b2.jpg


May be I will just buy more live rocks And adding it to the older one or perhaps change all of them later, what you guys suggest?

Cheers ,

MD


Sent from my iPhone using Tapatalk
 
the grain size of your newly purchased sand doesn't look very fine. is this # 1 sand? or #5sand?
 
It's number one according to seller , they said differnent supplier marked different number

They have the beach sand that is very very fine like sugar grains but I did not take it as it may be content silica stone and worried it will blast off by my strong wave maker in the tank .


Sent from my iPhone using Tapatalk
 
返回
上方 下方