有 Apex 的請照過來...

Conductivity要設定溫度補償請見他們的manual. 我不知道怎麼設定前也是被困擾很久。後來發現我漏讀那麼一小段居然有那麼大的差別
 
Conductivity要設定溫度補償請見他們的manual. 我不知道怎麼設定前也是被困擾很久。後來發現我漏讀那麼一小段居然有那麼大的差別


原來是有的:em03: !  力馬來看 小弟英文破阿 ! 就看基本的而已 還沒空讀完:em06::em06: 

感謝河馬大:em18:
 
https://www.neptunesystems.com/downloads/docs/PM2_manual.pdf#page5

TEMPERATURE COMPENSATION
Conductivity measurements are temperature dependent. The degree to which temperature affects conductivity varies from solution to solution. Seawater typically has a temperature correction factor of 2.1 to 2.3 %/C. In order for the PM2 to automatically compensate for changes in conductivity as the temperature of the water changes, you must connect a temperature probe to the PM2 and set the temperature compensation as described below. The temperature probe connected to the Apex Base Module cannot be used for automatic temperature compensation on the PM2.
WARNING: Temperature compensation value MUST be set to 0.0 if no temperature probe is attached to the PM2
To set the Temperature Compensation:
Apex Display: Setup – Cond Setup – Temp Comp – use the up/down arrow keys to select the temperature compensation in %/C, press OK when done or Exit to discard changes.


WARNING: Temperature compensation value MUST be set to 0.0 if no temperature probe is attached to the PM2
To set the Temperature Compensation:
Apex Display: Setup – Cond Setup – Temp Comp – use the up/down arrow keys to select the temperature compensation in %/C, press OK when done or Exit to discard changes.

他說可以設定在2.1到2.3之間,所以我取中間值設定在2.2目前使用上沒什麼問題。
溫度計需插在PM2上
 
最後編輯:
PH84_F_11_160927025438.JPG


PH84_F_11_160927025438_1.JPG


PH84_F_11_160927025438_2.JPG

(圖摘自以下連結, Jim's thread on Reef2Reef)

=========================================================

這個是 MACNA 2016 吸引眾多海水玩家目光的 KH Monitor,配合 Apex 可隨時隨地監控並自動調整

KH值,真是如虎添翼。用在硬骨缸,更是不可多得的神兵利器!令人期待後續發展…

也許…將來 Ca, Mg, K Monitor...也會陸續出現…大家就拭目以待吧!!!
)
Marc 專訪發明者 Jim (請點擊圖片,開啟影片)

https://www.youtube.com/watch?v=CJttd_YzmbQ


Want to know more about this new invention, check out Jim's thread here:https://reef2reef.com/threads/automatic-regular-unattended-alkalinity-monitoring.264562/
 
最後編輯:
Macna 2016 Apex new (?) products...:em15::em15::em15:

https://www.youtube.com/watch?v=olf8HeD7qZg&spfreload=10

(請點擊圖片,開啟影片)

(圖摘自以上連結)

PH84_F_11_160927025438.JPG


PH84_F_11_160927025438_1.JPG


PH84_F_11_160927025438_2.JPG

(圖摘自以下連結, Jim's thread on Reef2Reef)

=========================================================

這個是 MACNA 2016 吸引眾多海水玩家目光的 KH Monitor,配合 Apex 可隨時隨地監控並自動調整

KH值,真是如虎添翼。用在硬骨缸,更是不可多得的神兵利器!令人期待後續發展…

也許…將來 Ca, Mg, K Monitor...也會陸續出現…大家就拭目以待吧!!!
)
Marc 專訪發明者 Jim (請點擊圖片,開啟影片)

https://www.youtube.com/watch?v=CJttd_YzmbQ


Want to know more about this new invention, check out Jim's thread here:https://reef2reef.com/threads/automatic-regular-unattended-alkalinity-monitoring.264562/

好期待主馬跟KH Monitor哦 :em03::em03::em03::em03:
 
Jim Welsh 的KH monitor 約我們森哥產品兩到三年前的規模而已....明顯尚未考慮到 longevity test 後失效狀態..:em01::em01::em01:



Thanks for your chiming in!!!
 
PH84_F_11_160930021723.JPG


PH84_F_11_160930021723_1.JPG



人在紐約 JFK 國際機場,看著窗外遠方起起落落的飛機,來來往往的機場巴士,歸心似箭…

想念家人,也擔心家中的魚缸。雖然已搞成 "自動化 " 魚缸,但是還是超怕倒缸der...:em15::em15::em15:
 
返回
上方 下方